MACHINE SALES

Sharp 1440F Lathe: PRECISION LATHE
($15,785.00 | PRICES SUBJECT TO CHANGE)

FEATURES:

 14”x 40” Capacity
 8-5/8” Over Cross Slide
 16 Speeds (45- 1,800 rpm)
 D1-4 Camlock Spindle 1-1/2” Bore
 Gap Bed
 3 HP Motor (2-Speed Motor)
 Hardened and Ground Bed Ways (Rockwell 50)
 Larger Compound, Tailstock, and Apron Allow Heavier Cutting with Less Vibration than Competitive Models
 16 Speeds, All Geared Headstock Housed inside a Sturdy Cast Iron Base.
 Jog Button for Easy Gear Engagement and Inching Spindle

STANDARD EQUIPMENT

 3-Jaw 8” Chuck
 Steady Rest (Capacity ,¼” – 3”)
 Coolant System
 16 Speeds
 Full Length Splash Guard
 4-Way Tool Post (Removable Gap)
 6” Diameter Back Plate
 Tailstock, Back Plate, Foot Break, Thread Dial & Threading Dial
 Center Sleeve (MT #5 x 3)
 Dead Centers (MT #3)
 Tool Kit includes:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screw Driver,
Flat Head Screw Driver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 set of dead center, Pin for
Indicator, Can of Paint

Sharp 1640LV Lathe: PRECISION LATHE
($30,400.00 | PRICES SUBJECT TO CHANGE)

FEATURES:

D1-8 Camlock, 3” Hole, (L, LV Models)
 Direct Selection For Inch/Metric Threads
 One Piece Cast Meehanite Bed
 7-1/2 Hp Spindle Motor
 Digital Variable Speed (DVS) on “LV” Models
 “LV” Models are wired at 220V only. (440V requires an optional transformer.) Please specify.

STANDARD EQUIPMENT

Digital Variable Speed (DVS) Head Stock
 Bison 3-jaw 10” Chuck
 Face Plate (16”)
 Steady Rest w/bronze tip (1/2” to 6”)
 Coolant System
 Full Length Splash Guard
 American Tool Post
 6” Diameter Back Plate
 Threading Dial
 Center Sleeve (MT #5 x 3)
 Dead Centers (MT #4 x1, MT # 5 x1)
 Follow Rest (0.59” – 2.76”)
 Halogen Work Light
 Longitudinal carriage stops
 Machine is set only for 220 V. Needs an optional transformer for 440 V applications.
 Tail Stock & Tool Kit includes:
Machine Manual, Half Nut Wrench, Wrench 17m, 19m, Set of 6 Allen wrenches, Phillip Screwdriver, Flat
Head Screwdriver, Oil can, Grease Gun, Rear Way Cover Bracket, 2 sets of dead centers, 2 sets of dead
centers, 2 sets of dead centers, Pin for Indicator, Can of Paint.

Sharp 1118H High Precision Toolroom Lathe
($43,255.00 | PRICES SUBJECT TO CHANGE)

FEATURES:

DIGITAL VARIABLE SPEED (D.V.S.) Drive System
 High-speed spindle (infinitely variable 130-4,000 rpm), accuracy within 50 millionths TIR
 Hardened and ground spindle
 Independent electric feed-rate control on carriage and cross slide.
 Quick-change inch/metric gearbox with 36 changes.
 Spindle supported by double angular contact bearings.
 Quick-action compound slide for threading.
 One-piece alloy steel material hardened and ground bed ways, with turcite coating on carriage
and bed for smooth movements.
 Adjustable thread-length control stops
 On the Cutting Edge of Manual and CNC Machining June 2025
 Hardened and ground leadscrews.

STANDARD EQUIPMENT

 Splash Guard
 Coolant System
 5C Collet Closer
 Headstock center
 Tailstock
 Halogen work light
 Chuck Guard
 Spindle Nose Cover
 Leadscrew Cover
 American tool post
 Wired 220V, Single Phase/3 Ph (440V requires optional transformer)
 Toolbox

Milling Machine LMV-42 Vertical Mill
($12,900.00 | PRICES SUBJECT TO CHANGE)

FEATURES:

3HP Motor
 Variable Speed Drive (60-4500 RPM)
 R-8 Spindle
 Dual Cooling Fans
 Meehanite Casting
 On the Cutting Edge of Manual and CNC Machining June 2025
 Self-lubricating motor Shaft Extends Pulley Life
 Abec-7 Super Precision Spindle Bearings

STANDARD EQUIPMENT

One Shot Lube System
 Hardened & Ground Ways for X, Y, and Z Axis
 Turcite B Coating will be included on the X and Y axes for additional oil retention and longer wear resistance.
 Front and Rear Rubber Way Covers
 Tool Kit Includes:
Machine Manual Half Nut Wrench 17m & 19m, set of 6 Allen Wrenches, Philip Screwdriver, Flat Head Screwdriver,
Oil Can, Grease Gun, Rear Way Cover Bracket, Pin for Indicator, & Can of Paint.
 Wired 220V or 440V. Please Specify